With ibd Gelac you can create a beautiful 14 day manicure that can be applied over tips, acrylics, gels and natural nails for increased strength and beautiful color.

Kit Contains:

• 1 Top Coat.
• 1 Bonding Base Coat.
• 1 Nail Cleanser
• 6 Gel Nail Polish Colors:
• Cinnamon Coffee
• Crown jewel
• Red Clay
• Bellini
• Suger cookie
• Celebration
• Instructional DVD

Features:

• No chipping.
• No smudging,
• Easy to apply
• Sheer to full coverage.
• Fast 2 minute cure time.
• Very durable finish.
• Remove in 10 minutes.
• Lightweight .
• Vibrant colors.

To ensure success, you must use the complete Gelac system an apply as directed below. Gelac products are not designed to be compatible with other systems.

Step 1- Ibd Gelac Nail Prep - Perform a Manicure

• Shape the nail with a 180 grit file.
• Remove cuticle from the nail place with an ibd Two-side cuticle pusher.if the client has overgrown cuticles use a cuticle eliminator.
• Wash hands with liquid soap and water. Towel dry.
• Remove the shine from the nail plate using a 240 grit white buffing block and remove dust with a nail wipe. Make sure you do not touch the nail with your finger.
• Apply ibd Gelac Nail Prep onto the natural nail plate and allow to fully dry and before applying base coat.(Base, polish and topcoat steps should be done separately)

Step 2- Ibd Gelac Base Coat Application

• Apply ibd Gelac Base Coat very lightly (appearance should have a grainy effect If your nail is shiny bloct lightly with a nail wipe) to each nail and edge of all four nails on one hand. Thumbs are to be done separately.
• Remove the applicator brush from the bottle and wipe it against the bottle's neck to remove excess product from the brush.
• Apply Bonding Base Coat in the center of the nail starting from cuticle to edge of the nail, making sure to keep polish off the cuticle.
• Use a lint-free wipe and wipe the base coat from the cuticle to the free edge to evenly distribute the base coat.
• Cure all four fingers together for one minute in any idb UV lamp.
• Repeat the process on the other hand and finish with the thumb application.

Step 3- Ibd Gelac UV Gel Polish Application

• Roll the bottle between hands to blend
• Apply one very thin coat of color to each nail surface and edge to all nails on one hand. (If applied correctly, this layer will be slightly semi-sheer).
• Remove the applicator brush from the bottle and wipe one side against the bottle's neck to remove excess product from the brush.
• Stay parallel to the natural nail and place the brush in the center of the nail slightly away from the cuticle line.
• Apply Gelac polish in the center of the nail from cuticle to tip, making sure to keep polish off the cuticle If polish has touched the cuticle remove prior to curing the nail by using ibd Gelac Gel Cleanser and an orangewood stick.
• Make sure polish has covered the tip of the nail to ensure long wear.
• Cure all four nails for 2 minutes in an UV Lamp.
• Repeat the process on the other hand.
• Apply a second thin coat of polish using the same process. This coat provides full coverage when using an opaque color.
• Cure all four nails for 2 minutes in any UV Lamp, and finish with thumb application.

Step 4 - Ibd Gelac Top Coat

• Application Roll the bottle between hands to to blend.
• Apply one thin layer of ibd Gelac Top Coat to each nail surface and edge of all four nails on one hand.
• Remove the applicator brush from the bottle and wipe on side against the bottle's neck to remove excess product from the brush.
• Stay parallel to the natural nail and place the brush in the center of the nail slightly away from the cuticle line.
• Apply ibd Gelac Top Coat in the center of the nail starting from cuticle to the tip.
• Make sure the top coat has covered the tip of the nail to ensure long wear.
• Cure all four nails for 3 minutes in an UV Lamp.
• Repeat the process on the other hand and finish with the thumb application.

Step 5 - Cleanse: Ibd Gelac Gel Cleanser

• Saturate an ibd Nail Wipe with ibd Gelac Gel Cleanser.
• With light pressure wipe away the top film, (this is the sticky inhibition layer). CAUTION: Do not re-wipe the nail with a used portion of the Nail Wipe, as it will re-distribute the film causing dulling to top top coat.
• Use a clean saturated Nail Wipe for each finger, and repeat.

      **Note: if using a dark shade and your lamp is not 36 watt, the cure time will be 3 minutes instead of 2.

Thumbs

• After all four fingers have been cured and cleansed, repeat all steps on the thumbs.
• Polish and cure thumbs individually to prevent running or pooling.
• Be sure to press thumbs flat to the base of the lamp to ensure even curing.